Triple filter cartridge adhesive, room temperature curing adhesive SLAF61, is a special adhesive for filters. This adhesive adopts the latest technological formula and is a green and environmentally friendly product, making it one of the most ideal adhesive varieties in China today.
Usage:
Room temperature adhesive is suitable for paper filter cartridges used in internal combustion engines such as cars and tractors, as well as for bonding paper to iron plates or plastics.
Features:
The two-component room temperature curing filter cartridge special adhesive has good adhesion to metal paper, impact resistance, peel resistance, vibration fatigue resistance, as well as good wear resistance and oil resistance.
Technical parameters:
Appearance: A material is a white viscous liquid, while B material is a black liquid (color can be produced according to customer requirements)
Viscosity: 30-45kps. s
Adhesive strength: Initial adhesive strength 20-21KN/CM2
Peel strength: 40-48KN/CM2
High temperature 135 ℃ and low temperature -35 ℃ oil immersion test for 192 hours, no shrinkage cracking or delamination phenomenon.
Usage:
1. The surface of the end cover should be cleaned thoroughly to remove oil and dust, and thoroughly dried. There should be no foreign objects such as oil or water on the surface, otherwise it will affect the bonding strength.
2. Before adding ingredients, mix or invert material A in the barrel, mix material A and material B in a 6:1 ratio, and mix thoroughly and evenly.
3. Inject an appropriate amount of adhesive into the end cap and let it sit for a moment, so that the adhesive surface is evenly applied to various parts of the end cap.
4. Insert the filter cartridge paper (or add a central tube) into the end cover, check the surfaces of the two adhesive parts to ensure complete contact, and then apply slight pressure to the top and let it stand still.
5. After about 1 hour of curing, flip it over and cover it with adhesive on the other end. After 24 hours of complete drying, it can be packaged and used after 5 days.
Packaging specifications:
Each group weighs 35 kilograms, including 30 kilograms for material A and 5 kilograms for material B
Two component foam adhesive (SLAF81)
Triple filter cartridge adhesive room temperature curing adhesive SLAF81 is a filter specific adhesive that uses the latest technological formula and is a green and environmentally friendly product. It is one of the ideal adhesive varieties in China today.
Usage:
Room temperature adhesive is suitable for bonding paper filter cartridges, paper and iron plates used in internal combustion engines such as automobiles and tractors.
Features:
The two-component room temperature curing filter cartridge special adhesive has good adhesion to metal paper, impact resistance, peel resistance, vibration fatigue resistance, as well as good wear resistance and oil resistance.
Technical parameters:
Appearance: A material white viscous liquid, B material black liquid
Viscosity: 30-45kps. s
Adhesive strength: Initial adhesive strength 20-21KN/CM2
Peel strength: 40-48 KN/CM2
High temperature 90 ℃ and low temperature -35 ℃ oil immersion test for 192 hours, no shrinkage cracking or delamination phenomenon.
Usage:
1. The surface of the end cover should be cleaned thoroughly to remove oil and dust, and thoroughly dried. The surface should not have any foreign objects such as oil or water to avoid affecting the bonding strength.
2. Before adding ingredients, mix or invert material A in the barrel, mix material A and material B in an 8:1 ratio, and mix thoroughly and evenly.
3. Inject an appropriate amount of adhesive into the end cap and let it sit for a moment, so that the adhesive surface is evenly applied to various parts of the end cap.
4. Insert the filter cartridge paper (or add a central tube) into the end cover, check the surfaces of the two adhesive parts to ensure complete contact, and then apply slight pressure to the top and let it stand still.
5. After about 1 hour of curing, flip it over and cover it with adhesive on the other end. After 24 hours of complete drying, it can be packaged and used after 5 days.
Packaging specifications:
Each group weighs 33.75 kilograms, with A material weighing 30 kilograms and B material weighing 3.75 kilograms. The minimum order quantity is one group.
Glue solution (SLGO)
Usage: Room temperature adhesive is suitable for bonding paper filter cartridges, paper and iron plates used in internal combustion engines such as automobiles and tractors.
Features: The two-component room temperature curing filter cartridge special adhesive has good adhesion to metals and paper, resistance to impact, peeling, and vibration fatigue, as well as good wear resistance and oil resistance.
Technical parameters:
Appearance: Semi transparent liquid
Viscosity: 30-45kpa. s
Adhesive strength: Initial adhesive strength 20-21KN/CM2
Peel strength: 40-48KN/CM2
High temperature 135 ℃ and low temperature -35 ℃ oil immersion test for 192 hours, with no shrinkage cracking or delamination phenomenon.
Usage:
1. The surface of the end cover should be cleaned thoroughly to remove oil and dust, and thoroughly dried. The surface should not have any foreign objects such as oil or water to avoid affecting the bonding strength.
2. Before adding ingredients, mix or invert the A component in the barrel, and mix the A and B components in a 2:1 (weight ratio) ratio. Add 2 kilograms of talc powder to each kilogram of A component on average, and mix thoroughly and evenly.
3. Inject an appropriate amount of adhesive into the end cap and let it sit for a moment, so that the adhesive surface is evenly applied to various parts of the end cap.
4. Insert the filter cartridge paper (or add a central tube) into the end cover, check the surfaces of the two adhesive parts to ensure complete contact, and then apply slight pressure to the top and let it stand still.
5. After about 4 hours of curing, flip it over and cover it with adhesive on the other end. After 24 hours of complete drying, it can be packaged and used after 5 days.
2: 1:4 refers to a ratio of 2 kilograms of A glue to 1 kilogram of B glue to 4 kilograms of talc powder
Packaging specifications:
Among them, material A weighs 50 kilograms and material B weighs 25 kilograms. Each group weighs 75 kilograms.
We adhere to the mission of "technological innovation and serving energy", and our responsibility is to create value and achieve win-win results for the team. We strive to develop and strive to become a distinct team in the fire industry as soon as possible.